Towing Capacity Guidelines

It is critical to know your vehicle's maximum towing capacity before you begin towing. If you exceed the manufacturer's rated capacity you are creating an unsafe driving situation and are very likely to damage your vehicle's engine, transmission, rear axle, brakes and wheel bearings, along with voiding the manufacturer's warranty.

If you have not yet purchased a tow vehicle, remember that in general, AWD and 4WD vehicles have a lower towing capacity than a comparable 2WD vehicle. Pickup trucks with extra-cab and crew cab designs also tend to have lower towing capacity than comparable standard cab designs. It pays to research towing capacities thoroughly before you buy, and it's always best to buy a tow vehicle with a much larger towing capacity than you intend to use.

Checking Your Vehicle's Owner's Manual

Your best means of determining your vehicle's towing capacity is to read your vehicle's owner's manual and to compare the information there with the certification plate on your driver's door sill. The owner's manual will provide detailed instructions and limitations, usually accompanied by tips for safe towing. 

If your vehicle is not capable of towing any trailer, that will be stated explicitly in your owner's manual. If you do not have a copy of your owner's manual, many automakers allow you download a copy freely from the Internet. 

Finding Your Vehicle's Compliance Certification Label

After you've read your vehicle owner's manual, it's a good idea to double check the compliance certification label. This is typically a sticker placed somewhere in the driver's door sill area. This label will have several fields, labeled with acronyms such as "GVR," "GAW," and "GCWR." These fields are defined as follows:

Gross Vehicle Weight (GVW)

This is the vehicle's standard curb weight, plus an allowance for a standard amount of luggage, gas and passengers, as predicted by the manufacturer. Of course, your vehicle's actual weight will vary depending on how much luggage, gasoline, and passenger weight you have actually placed in the vehicle, so the GVW is an approximation.

Gross Vehicle Weight Rating (GVWR)

This is the maximum safe actual weight of your vehicle. If you exceed this weight, the vehicle's engine, transmission, brakes, and so on will be stressed beyond their design limits.

Gross Combination Weight (GCW)

This is the actual weight of your vehicle (GVW) plus the actual total weight (not the tongue weight) of your trailer. This number must not be higher than your vehicle's GCWR. 

Gross Combination Weight Rating (GCWR)

This is the maximum safe weight of your combined vehicle and trailer. This weight includes all people, luggage, and other material. If your combined towing setup exceeds this weight, your vehicle's engine, transmission, brakes, and so on will be stressed beyond their design limits.

Gross Axle Weight (GAW)

These numbers are the weights expected to be placed on your vehicle's front and rear wheels. The two numbers are likely to be different to account for engine weight and other factors.

Gross Axle Weight Rating (GAWR)

This is the maximum safe weight that can be placed on your front or rear wheels. The two numbers are likely to be different to account for engine weight and trailer tongue weight and luggage. If you exceed this weight rating on either the front or rear tires, you can create a dangerous driving situation or even damage your vehicle.

Checking Trailer Weight

After you understand your vehicle's weight capacities and general towing capacity, you need to learn your trailer's weight. Your trailer will have a VIN (Vehicle Identification Number) plate installed somewhere. This plate not only carries the trailer's serial number, it also lists the trailer's unloaded GVW and a maximum GVWR for the trailer and a GAWR for each axle on the trailer.

If you don't have access to a VIN plate or other weight information for your trailer, or if it's hard to estimate the total weight you're adding to the base GVW of the trailer, the best way to find the weight is to load your trailer as you expect to use it and take it to a vehicle scale. Such scales are sometimes available to recreational users at state highway weigh stations, refuse transfer stations, and commercial truck stops. The advantage of this method is that you learn the actual weight of your loaded trailer. Be sure to call ahead and confirm that you are welcome to use these scales, however. 

Checking Tongue Weight

The last capacity you have to consider is your trailer's tongue weight. That's the weight on the coupler when your trailer is fully loaded and ready to go. In general, you want to try for about 10% of the total trailer weight to be carried on the tongue. Most receivers and other hitches assume that the tongue weight will be abut 10%, and sticking to this ratio helps improve your towing experience.

Note that you can change your trailer's tongue weight substantially by changing the way you load the trailer. If you place more weight in front of your trailer's axle(s), you will generate more tongue weight. If you place too much weight behind the axle(s), you can actually generate negative tongue weight.

If you have too much tongue weight, your combined tow rig will sag at the coupler and you will find that your tow vehicle has to work much harder to pull the load. If you do not have enough tongue weight, your trailer will tend to wander and if you have negative tongue weight, your vehicle's rear tire traction can be reduced with dangerous consequences. Always strive for about 10% tongue weight and you'll get better results.